Installation guide

Command Line Interface
4-22
4
Command Mode
Global Configuration
Command Usage
Input strings cannot contain spaces. The banner configure equipment-info
command interprets spaces as data input boundaries. The use of underscores
( _ ) or other unobtrusive non-letter characters is suggested for situations
where white space is necessary for clarity.
Example
banner configure equipment-location
This command is used to configure the equipment location information displayed in
the banner. Use the no form to restore the default setting.
Syntax
banner configure equipment-location location
no banner configure equipment-location
location - The address location of the device.
(Maximum length: 32 characters)
Default Setting
None
Command Mode
Global Configuration
Command Usage
Input strings cannot contain spaces. The banner configure
equipment-location command interprets spaces as data input boundaries.
The use of underscores ( _ ) or other unobtrusive non-letter characters is
suggested for situations where white space is necessary for clarity.
Example
Console(config)#banner configure equipment-info manufacturer-id
2852Samsung-PoE floor 3 row 10 rack 15 shelf-rack 12 manufacturer
Edge-Core_Corporation
Console(config)#
Console(config)#banner configure equipment-location
710_Network_Path,_Indianapolis
Console(config)#