Installation guide

Command Line Interface
4-18
4
Banner Information Commands
These commands are used to configure and manage administrative information
about the switch, its exact data center location, details of the electrical and network
circuits that supply the switch, as well as contact information for the network
administrator and system manager. This information is only available via the CLI and
is automatically displayed before login as soon as a console or telnet connection has
been established.
banner configure
This command is used to interactively specify administrative information for this
device.
Syntax
banner configure
Default Setting
None
Command Mode
Global Configuration
Table 4-8 Banner Commands
Command Function Mode Page
banner configure Configures banner information that is displayed before login GC 4-18
banner configure
company
Configures Company information that is displayed by the banner GC 4-19
banner configure
dc-power-info
Configures DC Power information that is displayed by the
banner
GC 4-20
banner configure
department
Configures Department information that is displayed by the
banner
GC 4-21
banner configure
equipment-info
Configures Equipment information that is displayed by the
banner
GC 4-21
banner configure
equipment-location
Configures Equipment Location information that is displayed by
the banner
GC 4-22
banner configure
ip-lan
Configures IP and LAN information that is displayed by the
banner
GC 4-23
banner configure
lp-number
Configures LP Number information that is displayed by the
banner
GC 4-23
banner configure
manager-info
Configures Manager contact information that is displayed by the
banner
GC 4-24
banner configure
mux
Configures MUX information that is displayed by the banner GC 4-25
banner configure
note
Configures miscellaneous information displayed by the banner
under the Notes heading
GC 4-25
show banner Displays all banner information NE, PE 4-26