Installation guide

VLAN Configuration
3-205
3
Web – Click VLAN, Traffic Segmentation, Session Configuration. Set the session
number, specify whether an uplink or downlink is to be used, select the interface,
and click Apply.
Figure 3-115 Traffic Segmentation Session Configuration
CLI – This example enables traffic segmentation and allows traffic to be forwarded
across the uplink ports assigned to different client sessions.
Console(config)#pvlan session 1 uplink ethernet 1/24 downlink ethernet 1/14-259
Console(config)#exit
Console#show pvlan
4-261
Private VLAN Status : Enabled
Uplink-to-Uplink Mode : Forwarding
Session Uplink Ports Downlink Ports
--------- ------------------------------ -----------------------------
1 Ethernet 1/24 Ethernet 1/1
Ethernet 1/2
Ethernet 1/3
Ethernet 1/4
Ethernet 1/5
Ethernet 1/6
Ethernet 1/7
Ethernet 1/8
Console#