Installation guide

Configuring the Switch
3-76
3
Authorization EXEC Settings
This feature specifies an authorization method name to apply to console and Telnet
connections.
Command Attributes
Method Name - Specifies a user-defined method name to apply to console and
Telnet connections.
Web – Click Security, AAA, Authorization, Exec Settings. Enter a defined method
name for console and Telnet connections, and click Apply.
Figure 3-44 AAA Authorization Exec Settings
CLI – Specify the authorization method to use for Console and Telnet interfaces.
Console(config)#line console 4-41
Console(config-line)#authorization exec tps-auth 4-117
Console(config-line)#exit
Console(config)#line vty
Console(config-line)#authorization exec tps-auth
Console(config-line)#