System information

Multicast VLAN Registration

3-163

receiver ports that have registered to receive data from that multicast group.

(Default: Disabled)

• MVR Running Status – Indicates whether or not all necessary conditions in the

MVR environment are satisfied.

• MVR VLAN – Identifier of the VLAN that serves as the channel for streaming

multicast services using MVR. (Range: 1-4094; Default: 1)

• MVR Group IP – IP address for an MVR multicast group. The IP address range of

224.0.0.0 to 239.255.255.255 is used for multicast streams. MVR group addresses

cannot fall within the reserved IP multicast address range of 224.0.0.x. (Range:

224.0.1.0 - 239.255.255.255; Default: no groups are assigned to the MVR VLAN)

• Count – The number of contiguous MVR group addresses. (Range: 1-255;

Default: 0)

Web – Click MVR, Configuration. Enable MVR globally on the switch, select the

MVR VLAN, add the multicast groups that will stream traffic to attached hosts, and

then click Apply.

Figure 3-100 MVR Global Configuration

CLI – This example first enables IGMP snooping, enables MVR globally, and then

configures a range of MVR group addresses.

Displaying MVR Interface Status

You can display information about the interfaces attached to the MVR VLAN.

Field Attributes

• Type – Shows the MVR port type.

Console(config)#ip igmp snooping 4-201

Console(config)#mvr 4-210

Console(config)#mvr group 228.1.23.1 10 4-210

Console(config)#