System information

Configuring the Switch

3-218

Command Usage

• Each profile has only one access mode; either permit or deny.

• When the access mode is set to permit, IGMP join reports are processed when a

multicust group falls within the controlled range. When the access mode is set to

deny, IGMP join reports are only processed when the multicast group is not in the

controlled range.

Command Attributes

• Profile ID – Selects an existing profile number to configure. After selecting an ID

number, click the Query button to display the current configuration.

• Access Mode – Sets the access mode of the profile; either permit or deny.

(Default: Deny)

• New Multicast Address Range List – Specifies multicast groups to include in the

profile. Specify a multicast group range by entering the same IP address for the

start and end of the range. Click the Add button to add a range to the current list.

• Current Multicast Address Range List – Lists multicast groups currently

included in the profile. Select an entry and click the Remove button to delete it from

the list.