Manualshelf

Instruction manual

ManualsBrandsEdge-Core ManualsNetworkingECS4610-24F
78910111213141516
– 47 –
4 MAKING NETWORK CONNECTIONS
CONNECTING NETWORK DEVICES
The switch is designed to be connected remote devices using optional
1000BASE-SX, 1000BASE-LX, or 1000BASE-LH SFP transceivers. It may also be
connected to 10, 100, or 1000 Mbps network cards in PCs and servers, as well
as to other switches and hubs.
TWISTED-PAIR DEVICES
Each device requires an unshielded twisted-pair (UTP) cable with RJ-45
connectors at both ends. Use Category 5, 5e or 6 cable for 1000BASE-T
connections, Category 5 or better for 100BASE-TX connections, and Category 3
or better for 10BASE-T connections.
CABLING GUIDELINES
The RJ-45 ports on the switch support automatic MDI/MDI-X pinout
configuration, so you can use standard straight-through twisted-pair cables to
connect to any other network device (PCs, servers, switches, routers, or hubs).
See Appendix B for further information on cabling.
C
AUTION
:
Do not plug a phone jack connector into an RJ-45 port. This
will damage the switch. Use only twisted-pair cables with RJ-45
connectors that conform to FCC standards.
MASTER CONTRACT: 176914 (LR 99150)
REPORT: 2296506
PROJECT: 2296506
_______________________________________________________________________________________