MASTER CONTRACT: 176914 (LR 99150) REPORT: 2296506 PROJECT: 2296506 _______________________________________________________________________________________ Instruction Manual 1 ( 1 of 16) Powered by Accton ECS4610-24F 24-Port Stackable Layer 3 Gigabit Ethernet Switch Installation Guide www.edge-core.
MASTER CONTRACT: 176914 (LR 99150) REPORT: 2296506 PROJECT: 2296506 _______________________________________________________________________________________ Instruction Manual 1 ( 2 of 16) COMPLIANCES AND SAFETY STATEMENTS SAFETY COMPLIANCE Warning: Fiber Optic Port Safety CLASS I LASER DEVICE When using a fiber optic port, never look at the transmit laser while it is powered on. Also, never look directly at the fiber TX port and fiber cable ends when they are powered on.
MASTER CONTRACT: 176914 (LR 99150) REPORT: 2296506 PROJECT: 2296506 _______________________________________________________________________________________ Instruction Manual 1 ( 3 of 16) COMPLIANCES AND SAFETY STATEMENTS POWER CORD SAFETY Please read the following safety information carefully before installing the switch: WARNING: Installation and removal of the unit must be carried out by qualified personnel only.
MASTER CONTRACT: 176914 (LR 99150) REPORT: 2296506 PROJECT: 2296506 _______________________________________________________________________________________ Instruction Manual 1 ( 4 of 16) COMPLIANCES AND SAFETY STATEMENTS Power Cord Set U.S.A. and Canada The cord set must be UL-approved and CSA certified. The minimum specifications for the flexible cord are: - No. 18 AWG - not longer than 2 meters, or 16 AWG.
MASTER CONTRACT: 176914 (LR 99150) REPORT: 2296506 PROJECT: 2296506 _______________________________________________________________________________________ Instruction Manual 1 ( 5 of 16) COMPLIANCES AND SAFETY STATEMENTS ◆ La prise secteur doit se trouver à proximité de l’appareil et son accès doit être facile. Vous ne pouvez mettre l’appareil hors circuit qu’en débranchant son cordon électrique au niveau de cette prise.
MASTER CONTRACT: 176914 (LR 99150) REPORT: 2296506 PROJECT: 2296506 _______________________________________________________________________________________ Instruction Manual 1 ( 6 of 16) COMPLIANCES AND SAFETY STATEMENTS Bitte unbedingt vor dem Einbauen des Switches die folgenden Sicherheitsanweisungen durchlesen: WARNUNG: Die Installation und der Ausbau des Geräts darf nur durch Fachpersonal erfolgen. ◆ Das Gerät sollte nicht an eine ungeerdete Wechselstromsteckdose angeschlossen werden.
MASTER CONTRACT: 176914 (LR 99150) REPORT: 2296506 PROJECT: 2296506 _______________________________________________________________________________________ Instruction Manual 1 ( 7 of 16) COMPLIANCES AND SAFETY STATEMENTS WARNINGS AND CAUTIONARY MESSAGES WARNING: This product does not contain any serviceable user parts. WARNING: Installation and removal of the unit must be carried out by qualified personnel only.
MASTER CONTRACT: 176914 (LR 99150) REPORT: 2296506 PROJECT: 2296506 _______________________________________________________________________________________ Instruction Manual 1 ( 8 of 16) COMPLIANCES AND SAFETY STATEMENTS END OF PRODUCT LIFE SPAN This product is manufactured in such a way as to allow for the recovery and disposal of all included electrical components once the product has reached the end of its life.
MASTER CONTRACT: 176914 (LR 99150) REPORT: 2296506 PROJECT: 2296506 _______________________________________________________________________________________ Instruction Manual 1 ( 9 of 16) ABOUT THIS GUIDE PURPOSE This guide details the hardware features of the switch, including the physical and performance-related characteristics, and how to install the switch.
Edited by Foxit Reader Copyright(C) by Foxit Software Company,2005-2008 For Evaluation Only.
MASTER CONTRACT: 176914 (LR 99150) REPORT: 2296506 PROJECT: 2296506 _______________________________________________________________________________________ Instruction Manual 1 ( 11 of 16) CHAPTER 1 | Introduction Overview Figure 3: Cooling Fans Cooling Fans – 25 –
MASTER CONTRACT: 176914 (LR 99150) REPORT: 2296506 PROJECT: 2296506 _______________________________________________________________________________________ Instruction Manual 1 ( 12 of 16) CHAPTER 2 | Network Planning Application Examples APPLICATION EXAMPLES The switch is not only designed to segment your network, but also to provide a wide range of options in setting up network connections. Some typical applications are described below.
MASTER CONTRACT: 176914 (LR 99150) REPORT: 2296506 PROJECT: 2296506 _______________________________________________________________________________________ Instruction Manual 1 ( 13 of 16) CHAPTER 2 | Network Planning Application Examples REMOTE CONNECTIONS WITH FIBER CABLE Fiber optic technology allows for longer cabling than any other media type. A 1000BASE-SX (MMF) link can connect to a site up to 550 meters away, a 1000BASE-LX (SMF) link up to 10 km, and a 1000BASE-LH link up to 80 km.
MASTER CONTRACT: 176914 (LR 99150) REPORT: 2296506 PROJECT: 2296506 _______________________________________________________________________________________ Instruction Manual 1 ( 14 of 16) CHAPTER 3 | Installing the Switch Installing an Optional SFP Transceiver INSTALLING AN OPTIONAL SFP TRANSCEIVER Figure 12: Inserting an SFP Transceiver into a Slot The SFP slots support the following optional SFP transceivers: ◆ 1000BASE-SX ◆ 1000BASE-LX ◆ 1000BASE-LH To install an SFP transceiver, do the followi
MASTER CONTRACT: 176914 (LR 99150) REPORT: 2296506 PROJECT: 2296506 _______________________________________________________________________________________ Instruction Manual 1 ( 15 of 16) CHAPTER 3 | Installing the Switch Connecting to a Power Source NOTE: SFP transceivers are hot-swappable. The switch does not need to be powered off before installing or removing a transceiver. However, always first disconnect the network cable before removing a transceiver.
MASTER CONTRACT: 176914 (LR 99150) REPORT: 2296506 PROJECT: 2296506 _______________________________________________________________________________________ Instruction Manual 1 ( 16 of 16) 4 MAKING NETWORK CONNECTIONS CONNECTING NETWORK DEVICES The switch is designed to be connected remote devices using optional 1000BASE-SX, 1000BASE-LX, or 1000BASE-LH SFP transceivers. It may also be connected to 10, 100, or 1000 Mbps network cards in PCs and servers, as well as to other switches and hubs.
