Installation guide

HAPTER

| Installing the Switch

Mounting

– 43 –

DESKTOP OR SHELF MOUNTING

To attach the switch to a vertical surface:

1. Attach the four adhesive feet to the bottom of the first switch.

Figure 14: Attaching the Adhesive Feet

2. Set the device on a flat surface near an AC power source, making sure there

are at least two inches of space on all sides for proper air flow.

3. If installing a single switch only, go to "Connecting to a Power Source" on

page 45, at the end of this chapter.

4. If installing multiple switches, attach four adhesive feet to each one. Place

each device squarely on top of the one below, in any order.

26T