User guide

C HAPTER 21 | MAC Address Authentication Commands
– 172 –
RELATED COMMANDS
address filter entry
address filter entry This command enters a MAC address in the filter table.
SYNTAX
address filter entry <allowed | denied> <mac-address>
allowed - Entry is allowed access.
denied - Entry is denied access.
mac-address - Physical address of client. (Enter six pairs of
hexadecimal digits separated by hyphens; e.g., 00-90-D1-12-AB-
89.)
DEFAULT
None
COMMAND MODE
Global Configuration
COMMAND MODE
◆ The access point supports up to 1024 MAC addresses.
◆ An entry in the address table may be allowed or denied access
depending on the global setting configured for the address entry
default command.
EXAMPLE
AP(config)#address filter entry allowed 00-70-50-cc-99-1a
AP(config)#
RELATED COMMANDS
address filter default
address filter delete This command deletes a MAC address from the filter table.
SYNTAX
address filter delete <allowed | denied> <mac-address>
allowed - Entry is allowed access.
denied - Entry is denied access.
mac-address - Physical address of client. (Enter six pairs of
hexadecimal digits separated by hyphens; e.g., 00-90-D1-12-AB-
89.)