User guide

C HAPTER 17 | SNMP Commands
– 148 –
COMMAND MODE
Global Configuration
EXAMPLE
AP(config)#snmp-server contact Paul
AP(config)#
RELATED COMMANDS
snmp-server location
snmp-server
location
This command sets the system location string. Use the no form to remove
the location string.
SYNTAX
snmp-server location <text>
no snmp-server location
text - String that describes the system location.
(Maximum length: 255 characters)
DEFAULT SETTING
None
COMMAND MODE
Global Configuration
EXAMPLE
AP(config)#snmp-server location WC-19
AP(config)#
RELATED COMMANDS
snmp-server contact
snmp-server enable
server
This command enables SNMP management access and also enables this
device to send SNMP traps (i.e., notifications). Use the no form to disable
SNMP service and trap messages.
SYNTAX
[no] snmp-server enable server
DEFAULT SETTING
Enabled
COMMAND MODE
Global Configuration