Instruction Manual

List of Contents
E4
● The shape shown in illustration may differ from the actual product.
●Controller Kit (Part Number EDK04-R6655)
Note: For most types of shock absorbers, a set screw has to be replaced with
EDFC Hex Bolt (M6) included in EDFC5 kit. Be sure to replace all screws.
Not doing so might have an adverse impact on the damping force adjustment
mechanism. For details, please refer to Pg.E15.
Signal Converter KIt (for replacement etc) includes 3 Branch Connectors
marked with ☆.
INTORODUCTION
Description Qty/Kit Part Number
1 －
Driver Unit 2 EDC01-R6654
Motor Cable 4 EDC01-P8026
Power Supply Filter 1 EDC01-P8061
Driver Power Cable (2m) 1 EDC01-P8024
Driver Power Cable (LONG 5m) 1 EDC01-P8025
Double-Stick Tape 1
10
2Plug
2
Spade Terminal 2
Branch Connector ☆ 6
EDFC Hex Bolt (M6) 4 SAP44-P8463
EDC02-P8023
Controller Unit
Plug Receptacle
Signal Converter 1
EDC01-Q0351
Wire (Orange)
For connecting to vehicle's speed signal line
1
Wire (Blue) For connecting to external input 1 1
Wire (Green) For connecting to external input 2 1
Cable Tie
Instruction Manual (this manual) 1 －
－