Cov lus qhia

22
EN
Product usage
B
Before using the product
IMPORTANT!
• This speaker contains a non-replaceable battery.
• Before plugging in and starting the unit, make sure that all controls are turned
off or set to a low level.
• If the speaker is not performing correctly, this may be because the battery is
too low and needs recharging.
Charging the speaker
1. Insert the AC adapter plug into the wall socket.
2.
Insert the other end of the AC adapter cable into the DC IN socket on the top of the speaker.
• The battery indicator light is red when the speaker is charging and turns off when the
battery is full.
• Before first use, charge the battery fully for at least 6 hours. A full battery can play about
2 hours of music when playing at 80% volume.
•
A sound prompt will alert you when the battery is low. When the battery is low, the volume
will drop to 30%.
NOTE: To preserve the battery life, do not let the battery run down completely.
Always keep some charge in the battery, even if you are not using it.
Connections
Connect your device to the speaker using the cables and sockets/slots detailed below:
Device Connection Speaker Socket/Slot
Microphone
Use a microphone cable with a 6.35mm
plug (not provided).
MIC 1/MIC 2
Phone, iPad or
tablet
MP3 player
Use an AUX input cable with a 3.5mm
plug (not provided). The other end of the
cable must fit your audio device.
AUX IN
USB stick Plug in your USB stick to play files. USB 1
NOTE:
•
For best playback, make sure only compatible audio files (MP3/WMA/WAV)
are stored on the USB stick.
• When the USB stick is inserted, the stored files will immediately start playing.