Use and Care Manual

1
APTOOK
www.aptook.com
[e-mail]
7
OPERATION
Control Panel Guide
(1)
Press this button while on electric, screen light on, machine automatically goes to continuous mode,
display screen shows environmental humidity, compressor on after fan run for 3 seconds; press this
button again, compressor stops, double 8 shows “- -”, machine goes to standby mode, fan will run
for another minute and stop.
(2)
Press this button while machine is on electric, until button light goes on, press “MINUS”“ADD”to set the
time to start the machine, when the count down is over, fan and compressor start work.Press this button
while machine is running, until the button light goes on, press “MINUS”“ADD”to set the time to stop the
machine, when the count down is over, fan and compressor stop work.Press this button for 3 seconds
shows current temperature, return to current humidity after 10 seconds. Long press this button shows
temperature.
(3)
Increase the humidity by pressing this button at normal mode, humidity increase 5% RH with each press,
buzzer rang each time with the press, press the button for 1 second can increase the humidity
continuously; press this button to set the time after press “TIMER”.
POWER
TIMER
ADD