Use and Care Manual

1
APTOOK
www.aptook.com
support@aptook.com
12
MAINTENANCE
Cleaning the Machine Body: Clean the machine body with a soft damp cloth. Do not sprinkle water on
the unit. Do not use chemical solvent such as benzene, alcohol, gasoline. The surface may be damaged,
even the whole case may be deformed.
Cleaning the Air Filter:
1.Pull out the louver of the front panel to get access to the filter.
2.Remove the filter mesh out of the unit.
3.Use a clean cloth to adsorb the surface dust on the filter mesh. If the filter is extremely dirty, use tap
water to rinse the filter. Please dry it thoroughly before inserting the filter back into the unit in smoothly.
Dehumidifier Storage:
If the dehumidifier will not be used for an extended period, please refer to the following tips:
1.Clean the filter mesh.
2.Attention: The inner evaporator has to be dried out before the unit is stored to avoid component
damage and molds. Unplug the unit and place it in a cool and dry area for days to dry it out. Another
way to dry the unit is to set the humidity 3% higher than the ambient humidity to force the fan to dry the
evaporator for a couple of hours.
3.Use the wrapping post to put away the power cord.
4.Store the unit in a cool dry place.