Instructions / Assembly

2. Clean the filter

Use a vacuum cleaner to gently absorb the dust on the surface of the filter. If the filter is very dirty,

you can use tap water to rinse the filter, and completely cool and dry it, then put it back into the forward

air sheet, which can improve the performance of the machine.

Suggestion: Clean the filter once after every 3 months of use.

3. Assemble the filter and air inlet frame

(1) The filter will be put into the assembly of the air inlet frame buckle position, need to be assembled

in place.

(2) The air inlet frame will be held up with force, the air inlet frame will be rotated and assembled to the

machine inside, which must be assembled in place.

(3) Lock the handle screws on both sides above the air inlet frame to fix it.

Ⅱ. Machine body cleaning

Use a soft, slightly damp cloth to wipe the body.

Ⅲ. Machine storage

When you do not use this product for a long time and intend to store it, pay attention to the

following steps.

1. Drain the water from the machine body.

2. Tidy up the power cord.

3. Clean the filter.

4. Place it in a fresh and dry environment.