Instructions / Assembly

Handel Screws
Control Panel Assembly
Control Panel Hole Cover
Control Panel
Screws
Lower Cover
Ⅵ: Wall assembly method for control panel
When the machine is shipped, the control panel is assembled on the front of the machine.
In order to facilitate the user to install the control panel on the wall, the control panel needs to be
removed and the control panel installed on a wall surface that is convenient for operation, as follows.
1. Remove the 2 handel screws of the lower cover below the machine.
2. Pinch the handel screws in the middle of the front panel below with your hands and pull outward with
gentle force to pull the front panel apart.
3. screwdriver to screw down the 2 fixed screws and remove the control panel assembly, then install
the cover in the location of the control panel of the machine and fix it with 2 screws.
4. Remove the upper cover of the control panel assembly with a screwdriver; then remove the 2 screws
and remove the lower cover.
5. Mount the lower cover of the control panel assembly on a wall where it can be easily operated.
15