Instructions / Assembly

Adjustable Nut

Ⅲ: Ducting installation

1. Align the duct adapter with the 4 screw positioning holes on the side.

2. Lock and fix the duct adapter with screws.

3. The user can put the exhaust pipe (purchased by the user according to the demand) on the duct

adapter, and it must be placed within the buckle position.

4.You can install the flex duct yourself,the duct adapter diameter is 6.88inch/17.5cm.

Ⅳ: Adjustable feet installation

When the machine is placed on the ground or used on some platforms, feets need to be installed

1. It is necessary to install 4 feets on the bottom plate of the body.

2. Adjust the height of the position adjustment nuts of the 4 feets to a suitable position

3. Assemble the 4 feets in the threaded holes on the bottom plate of the body respectively,

and lock tighten.

3. Assemble the 4 feets in the threaded holes on the bottom plate of the body respectively,

and lock tighten.

2. Adjust the height of the position adjustment nuts of the 4 feets to a suitable position.