Instructions / Assembly

11
In auto mode or sleep mode, press the up and down adjustment button to cyclically adjust the set
humidity. Each time the up (or down) button is pressed, the set humidity will increase (or decrease)
by 1%.
During the adjustment of the set humidity, the set humidity will flash and display, after the adjustment
is completed, it will flash and display 5 times to confirm, and then switch to display the ambient humidity.
1. Intelligent defrosting: When a defrosting signal is detected, defrosting will start, and the corresponding
mode light will flash.
2. Timing function: can set timing/query timing/cancel timing
a) In the non-timing state: press the "timing" key to enter the timing setting state, the digital flashes to
display the timing time, and press the up and down keys to adjust the timing time (0~24h) during the
flashing period.
b) In the timing state: press the "timing" button, the timing time will be displayed by flashing, and press
the "timing" button again during the flashing to cancel the timing.
3. Water-full protection: When the water-full signal is detected, the water-full light is on and the digital
flashes to display "FL", the buzzer beeps 5 times to alarm, and the machine is turned off. After power
failure and drainage, resume normal operation.
Ⅰ: Take out the accessories from the packing box: ceiling mount
gasket, screws
Humidity Control
Additional Function
Installation and assembly of accessories