Instructions / Assembly

D.ADD Button

Press this button to adjust the set humidity (20-90%) or timing time (0-24h) in an upward cycle.Press the

button for 3 seconds to switch between Fahrenheit and Celsius temperatures.Increase the humidity by

pressing this button at normal mode, humidity increase 1%RH with each press, buzzer rang each time with

the press, press the button for 1 second can increase the humidity continuously;

Press this button to down cycle to set humidity (20-90%) or timing time (0-24h).Press the

button for 3 seconds, then the temperature display will blink to display the coil temperature,

and the ambient temperature will still be displayed after 5 seconds.ecrease the humidity by

pressing this button at normal mode, humidity decrease 1%RH with each press, buzzer rang each time with

the press, press the button for 1 second can decrease the humidity continuously;

Environmental humidity＞machine set humidity+3%, compressor, and fan start running.

Environmental humidity＜machine set humidity+3%, the compressor stops, and the fan stops after a

delay of 5 seconds, and the compressor meets the three-minute delay protection.

The machine set humidity+3% ≤ environmental humidity ≤ machine set humidity+3%, and keeps running

in the original state.

The humidity cannot be adjusted, and the compressor can run continuously without being restricted

by the ambient humidity (to meet the three-minute delay protection of the compressor)

The setting humidity is adjustable (20%-90%), and the ambient humidity (20%-95%) is displayed after

the humidity setting is completed.

Default auto mode after on electric (default setting humidity 50%)

Press the mode button to select the continuously drying mode, and the light is on.

Press the mode button to select the sleep mode, and the light is on.

In sleep mode, if there is no button operation for 10 seconds, the display will enter a dark state.

If there is a button operation in sleep mode, it will return to normal display. After 10 seconds, if there

is no other button operation, it will continue to enter the dark display state.

In sleep mode, if there is a fault or the water is full, do not beep and the fault code will be

dimly displayed.

(Default humidity 60%, humidity adjustable)

Displays ambient humidity (20%-95%).

E.Minus Button

1.Auto Mode

Operating Mode

2.Continuously Drying Mode

3.Sleep Mode