LUDO Dehumidifier User Manual Model No.: OL-R230S Please read this User Manual before operating and save for future reference. You've been covered with a 1-year free warranty offered by LUDO which is automatically valid from the date of purchase.
CONTENTS SAFETY INFORMATION, 1 PRODUCT SPECIFICATIONS. co... 2 PARTS IDENTIFICATION... 3 OPERATION 4 1. Position Your nectarine evens eases 4 2. Set Up the 4 3. Plug in Electrical Cord... 5 4. Understand the Control Panel... messes 5 5. Smart FUNCTIONS cco sss 7 Cleaning the on Cleaning the Air Filter. Dehumidifier Storage. TROUBLE SHOOTING GUIDE. WARRANTY INFORMATION.
SAFETY INFORMATION » Install the dehumidifier on flat surface to minimize vibration and or noise. = Inspect the power cord before use. Never operate the dehumidifier when the power cord or plug is damaged. + Insert the three-prong plug on the power cord into a matching electrically grounded outlet {(115V/ least). Do not use an adapter. Never cut off the third prong. Do not use an extension cord. » Do not operate the dehumidifier in standing water. Keep motor and wiring dry.
PRODUCT SPECIFICATIONS LUKE Dehumidifier Mabel No. OL-R2308P Power Source AC 110-120V, 60 Hz input Power 945 W {80°F, RH 80%) | Input Current 8.3A Moisture Removal | 130 Pints/Day input Power 1140 W {86°F, RH 80%) | Input Current 10.6 A Moisture Removal | 200 Pints/Day Input Power 1275 W (80°F, RH 90%) | Input Current 114A Moisture Removal | 230 Pints/Day BC 15A Motor Compressor EVERLASTING; LRAS0O.5A Refrigerant R410a (26.8 02.) High Pressure 522 PSI (3.6 MPa) Low Pressure 240 PSI (1.
PARTS IDENTIFICATION Handle {Height Adjustable) TUR Tio And Tia Rubber Whee! { Tirol Panel aC Poor Cod ~ fate Dunn Outed Cat Winder (Use whenpumpdhtue) Tan Dads Hale Urn Disney How NOTE: « Do NOT obstruct the air inlet and/or outlet while the dehumidifier is running. « Apart from the 17 ft long drain hose for pump drainage, the package also includes a 3.3 ft hose which is used for emergency drainage in the event of pump failure.
OPERATION INSTRUCTIONS 1. Position Your Dehumidifier IMPORTANT Transporting or storing the dehumidifier in a horizontal position is not recommended. When the dehumidifier is placed in a horizontal position, the oil from the compressor can flow into the refrigerant coils and reduce the ability of the dehumidifier to function and possibly damage the dehumidifier. If the dehumidifier has been placed in a horizontal position, set it upright and let it stand for at least 24 hours before plugging tin.
3. Plug in Electrical Cord The dehumidifier needs to be plugged into a Clog-protected 115 volt outlet rated for at least 15 amps. Uncoil the power cord from the winder and plug it firmly Into a suitable outlet. After plugged in, the dehumidifier will automatically enter into standby mode where the readout on the display screen is in dim light. 4. Understand the Control Panel Display Screen The first line of the display shows the total number of hours the dehumidifier has been in operation.
dehumidify again automatically. PURGE Button: Press and hold the PURGE button for 3-5 seconds to employ water from the pump reservoir. Use "PURGE" before moving the dehumidifier to avoid water spillage. The FULL indicator will light up after you pressed the PURGE button, which means the pump is working. 30 seconds later, the pump will stop working automatically and the FULL light will go off. NOTE: During operation, the pump purges automatically via the drain hose when the reserve is full.
5. Smart Functions Auto Drainage Thanks to the built-in pump, the dehumidifier will drain the condensation water automatically. Wait 3 Minutes before Resuming Operation To avoid any damage fo the dehumidifier, the dehumidifier will not start operation following a complete cycle until after 3 minutes. Operation will automatically start after 3 minutes. Auto Defrost When the frost builds up on the evaporator coils, the compressor will cycle off and the fan will continue to run until the frost disappears.
MAINTENANCE A Ensure the dehumidifier Is turned OFF and the plug Is removed from the prows socket before cleaning or maintenance is carried out. 1. Cleaning the Dehumidifier Clean the dehumidifier house with a soft damp cloth. Do not submerge or place water on the dehumidifier or control panel. Water may damage the electronic components of the dehumidifier. Do not use chemical solvents such as benzene, alcohol, gasoline or other heavy-duty cleaners. The surface may become damaged or deformed. 2.
TROUBLE SHOOTING GUIDE Problem Possible Cause Solution No power to dehumidifier Connect plug to power socket Dehumidifier does not Switch a operate witch not muted on Switch on E4 error is displayed Check drainage flow Insufficient working time Allow more working time Filter is blocked Clean filter Dehumidifier collects little water Low ambient temperature Heat up the room Condensate hose is blocked Check hose for restrictions dehumidifier operating, Doors and windows are open Seal room from external areas
WARRANTY INFORMATION LUDO offers a 1-year free warranty on all of our products, with original proof of purchase and where a deface has arisen, wholly or substantially, as a result of faulty manufacture, parts or workmanship during the warranty period.