Use and Care Manual

Cautions
1
OL70-D056CW
Instruction Manual
IMPORTANT SAFETY TIPS
Your safety is the most important thing we concern!
WARNING:Please read the following tips carefully and fully understand them before operating your appliance.
OPERATIONAL PRECAUTIONS
WARNING: to reduce the risk of fire, electric shock, or injury to people or property:
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified people to avoid any hazard.
This appliance should be disconnected from its power source during service.
Always operate the unit from a power source of equal voltage, frequency, and rating as indicated on the product identification plate.
Always use a power outlet that is grounded.
Unplug the power cord when cleaning or when not in use.
Do not operate with wet hands. Prevent water from spilling onto the appliance.
Do not immerse or expose the unit to rain, moisture, or any other liquid.
Do not leave the unit running unattended. Do not tilt or turn over the unit.
Do not unplug while the unit is operating.
Do not unplug by pulling on the power cord.
Do not use an extension cord or an adapter plug.
Do not put objects on the unit.
Do not climb or sit on the unit.
Do not insert fingers or other objects into the air outlet.
Do not touch the air inlet/outlet.
Do not operate the appliance if it is dropped, damaged, or showing signs of product malfunction.
Do not clean the appliance with any chemicals.
Ensure the unit is far away from fire, inflammable, or explosive objects.
The unit shall be installed in accordance with national wiring regulations.
Do not use means other than those recommended by the manufacturer to accelerate the defrosting process or to clean.
The appliance shall be stored in a room without continuously operating sources. (for example: open flames, operating gas appliances, or operating electric heaters.)
The appliance shall be stored in the way that prevents mechanical damage.
Do not piece or burn the unit, even after use.
Be aware that refrigerants may not have odor.
Pipework shall be protected from physical damage and shall not be installed in an unventilated space that is smaller than 4 m².
Comply with national gas regulations.
Keep any required ventilation openings clear of obstruction.
The appliance shall be stored in a well-ventilated area where the room size corresponds to the room area as specified for operation.
Any person who is involved with working on or breaking into a refrigerant circuit should hold a current valid certificate from an industry-accredited assessment
authority, which authorizes their competence to handle refrigerants safely in accordance with an industry-recognized assessment specification.
Servicing shall only be performed as recommended by the manufacturer.
Maintenance and repair that require the assistance of other skilled personnel shall be carried out under the supervision of a person competent in the use of flammable refrigerants.
WARNING
WARNING