Instructions / Assembly
6
WATER TANK & DRAINAGE
1. Water Tank Full Alarm
● When the tank is full, the Water Tank Full Indicator lights up and the unit beeps for five times (will not beep if
in Sleeping mode).
● The compressor and fan automatically shut down and all the functions freeze until the tank is emptied and
back in the right position.
2. Empty the tank
● Grab the notch at the two sides of the tank and pull it out with both hands carefully.
● Empty the water.
● Put the water tank back in position. The dehumidifier will resume working.
3. Manual Drainage
● Use the water tank for drainage. Empty the tank when the Water Tank Full Indicator lights up.
4. Continuous Drainage
● Take out the water tank.
● Use a drain hose (diameter = 0.43 inches & ideal length = 11.8 inches) to connect the water outlet.
● Pass the drain hose through the cutting hole on the tank and put the tank back.
WARNING: the end of the hose should not be submerged in water to prevent it from being blocked or damaged.