Manualshelf

Instructions / Assembly

ManualsBrandsEdendirect ManualsDehumidifiers125 pt. 8,500 sq.ft. Commercial Grade Dehumidifier for Basement, Home and Large Room with 12 H Timer
12345678910
4
OPERATION
POWER
Press this button to turn the unit on/ off. The“POWER” buttonr will light up when the unit is on, and the default
settings for fan speed and humidity level are: high and 50%.
MODE
There are three mode options: Intelligent-Continuous-Sleeping
Intelligent mode: Both target humidity level and fan speed are adjustable. The fan and compressor will start
working when the environmental humidity level >= set humidity level + 3%, and will stop working when the environ-
mental humidity level <= set humidity level - 3%.The“MODE” button will appear blue.
Continuous mode: The unit will run continuously with high fan speed regardless of the ambient humidity level,
and the target humidity level can’t be set according to one's own desire.The“MODE” button will appear red.
Sleeping mode: All indicators will turn dark, the fan speed will always remain low, and the target humidity level
can’t be set according to one's own desire. The fan and compressor will start working when the environmental
humidity level >= 63%, and will stop working when the environmental humidity level <= 57%.The“MODE” button
will appear green. Touch any button to wake the indicators up.
Press this button once to switch between the modes.
3.1 BUTTONS
MINUS
Each press of this button will decrease the set humidity level/timer by 5 %/1 hour within the range of
30-80%/0-12 hours.
TIMER
The first press of this button will turn the timer on, and each further press will increase the timer by 1 hour. The
timer will automatically turn off when it reaches 12 hours (shown as “00” on the LED display). When the timer
is operating, press this button when the timer digits flash to cancel the timer.
In the power-on state, the timer indicates the length of operation time.
In the standby state, the timer indicates the length of time until the reserved turning-on time.
The “TIMER” button will always be lit when the timer is on.
ADD
Each press of this button will increase the set humidity level/timer by 5 %/1 hour within the range of
30-80%/0-12 hours.
ION LOCK
SPEED
MINUS ADD
TIMER
MODE POWER
MINUS
ADD
TIMER
MODE
POWER