Instructions / Assembly

1
CAUTIONS
Please read this manual carefully before operating and keep it for further reference!
If you have any questions, please contact us at [e-mail] for help.
● Separate and count all parts and hardware.
● Read through each step carefully and follow the proper order.
● If possible, assemble the unit near where it will be placed in use, to avoid unnecessary moving.
● Always place the unit on a flat, steady and stable surface.
● Keep all small parts and packaging materials away from babies and children.
● If the supply cord is damaged, it must be replaced by the manufacturer.
● The appliance shall be disconnected from its power source during maintenance.
● Always operate the unit from a power source of equal voltage, frequency and rating as indicated on the product identification plate.
● Always use a power outlet that is grounded.
● Unplug the power cord when cleaning or when not in use.
● Do not operate with wet hands.
● Prevent water from spilling onto the unit.
● Do not immerse or expose the unit to rain, moisture or any other liquid.
● Do not leave the unit running unattended.
● Do not tilt or turn over the unit.
● Do not unplug while the unit is operating.
● Do not unplug by pulling on the power cord.
● Do not use an extension cord or an adapter plug.
● Do not put objects on the unit.
● Do not climb or sit on the unit.
● Do not insert fingers or other objects into the air outlet.
● Do not touch the air inlet or the aluminum fins of the unit.
● Do not operate the unit if it is dropped, damaged or showing signs of product malfunction.
● Do not clean the appliance with any chemicals.
● Ensure the unit is far away from fire, inflammable, or explosive objects.
● The unit shall be installed in accordance with national wiring regulations.
● Do not use means to accelerate the defrosting process or to clean, other than those recommended by the manufacturer.
● The appliance shall be stored in a room without continuously operating sources (for example: open flames, an operating gas
appliance or an operating electric heater).
● The appliance shall be stored so as to prevent mechanical damage from occurring.
● Do not piece or burn, even after use.
● Pipe-work shall be protected from physical damage and shall not be installed in an unventilated space, if that space is smaller than 43 sq.ft .
● Compliance with national gas regulations shall be observed.
● Keep any required ventilation openings clear of obstruction.
● The appliance shall be stored in a well-ventilated area where the room size corresponds to the room area as specified for operation.
● Any person who is involved with working on or breaking into a refrigerant circuit should hold a current valid certificate from an
industry-accredited assessment authority, which authorizes their competence to handle refrigerants safely in accordance with
an industry-recognized assessment specification.