Use and Care Manual

Installation and removal
of heat discharge pipe
Precautions for installing
heat discharge pipe
Installation
disassemble
1.Tighten the heat discharge pipe
joint counterclockwise to either end
of the heat discharge pipe.
In order to improve refrigeration efficiency, the installation of heat pipes should be as
short and flat as possible, without distortion, and to maintain the smoothness of the
heat discharge pipe.
Remove the heat discharge pipe joint: Gently tap the heat discharge pipe joint
upwards with your hand to remove the limit point of the heat pipe joint from the slot.
2.Tighten the duckbill shaped adapter counterclockwise to
the other end of the heat discharge pipe.
3.Insert the heat discharge pipe joint from top to bottom into the rear
shell slot,If you hear a "click" sound, it indicates that the card slot has
tightened the joint.
4.Guide the outlet of the heat pipe to the outside.
counter-clockwise
direction
Heat discharge pipe
correct correct
error
Slot
Limiting point
Remove
UPWARD
error
counter-clockwise
direction
Heat discharge pipe
Exhaust pipe joint
Duck billed adapter
If there is any problem,
pls contact us:
[e-mail]