Use and Care Manual

1.Check if the air inlet and outlet are blocked.
2.Check if the plug and socket are in good condition.
3.Check if the filter is clean.
4.Check if the remote control is equipped with a battery.
5.Check if the heat pipe is damaged and if it is securely installed.
1.Please comply with all local laws and regulations during installation.
2.Do not use damaged or non-standard power cords.
3.Pay attention to safety during installation and maintenance, prohibit illegal operations, and
avoid accidents such as electric shock, high-altitude falling injury, and even death.
Installing in the following areas may cause air conditioner malfunctions. If unavoidable, please
consult your local dealer
1.Areas with strong heat source vapors, flammable and explosive gases, or volatile substances
dispersed in the air.
2.Areas with high-frequency facilities (such as welding machines, medical equipment).
3.Seaside salt area.
4.Areas with oil content in the air.
5. Areas containing sulfur gas.
6.Other special environmental areas.
7.unstable or moving foundations (such as trucks) or in corrosive environments (such as
chemical plants).
1.Keep the air inlet away from obstacles, and do not place any objects near the air outlet,
otherwise it will affect the heat dissipation of the pipe.
2.Noise and airflow will not affect neighboring areas.
3.Please try to stay away from fluorescent lamps as much as possible.
1.Please make sure to follow the electrical safety regulations and install the air conditioner.
2.According to local electrical safety regulations, a dedicated power supply line should be
configured when using this product.
3.Please ensure that the power supply meets the requirements of the air conditioner. Unstable
power supply or incorrect wiring may cause electric shock, fire, or electrical component failure.
Please contact the power personnel to resolve the issue before using the machine.
4.Please make sure to correctly connect the live wire, neutral wire, and ground wire of the power
socket.
5.Before carrying out any electrical safety work, please make sure to cut off the power supply of
the air conditioner.
6.Do not turn on the power until all installations are completed.
7.This electrical appliance belongs to Class I appliances and must be properly grounded.
Connect the ground wire to a dedicated grounding device to ensure effective grounding at all
times. Improper grounding may cause electric shock.
8.The grounding resistance should comply with the electrical safety regulations of the local
country.
1.Cut off the power supply of the air conditioner.
2.Clean the filter frame and shell.
3.Remove accumulated water from the built-in drain tray (please refer to the "Drainage Method"
section for details).
If you do not use the air conditioner for a long time, it is recommended that you follow the
following steps to maintain the good performance of the air conditioner:
1.Ensure that there is no accumulated water in the drain tray and remove the heat pipe.
2.Remove the plug and pack the power cord properly.
3.Clean the air conditioner and package it to prevent dust accumulation.
Please do not dispose of electrical appliances as unclassified urban waste and collect
them separately Facilities, if electrical appliances are disposed of at will in landfills or
storage areas, harmful substances，It can seep into groundwater and enter the food chain,
damaging your health and well-being.
Simultaneously press and hold the " " and " " keys to restore the device to its factory settings,
clear memory data such as temperature and wind speed, and restore initial data
Inspection before the usage season
Electrical connection requirements
Installation precautions
Location selection
Inspection after the usage season
Long term storage
Recycling precautions
Restore factory settings
Attention
Basic requirements:
peripheral environment requirements:
Safety precautions:
If there is any problem,
pls contact us:
[e-mail]