Use and Care Manual

When the power is turned on, the machine emits a beep sound (refer to the power parameters on the
nameplate to connect to the power), and the machine enters standby mode. At this time, the
machine can be controlled using the control panel or remote control.
Press the standby button , the machine will start up, enter default mode, and the corresponding
indicator light will light up; Press the standby button again, the machine stops working, enters
the shutdown state, and all indicator lights turn off. If the machine is not used for a long time, it is
recommended to unplug the power cord from the socket.
Wind speed setting: Press " "to select "high" → "mid" → "low" → "auto" wind speed, and select in
a closed loop; In auto mode, the machine automatically adjusts the wind speed based on the
ambient temperature.
Note: In dehumidification mode, this button is invalid
Long press the mode key " " to turn on or off the anion function. After turning on, the anion
indicator light and the icon will light up, and vice versa, it will be turned off.
Press " " to turn on or off the automatic wind up/down function. After turning it on, the wind
up/down indicator light and the icon will light up, and vice versa, it will be turned off.
Press " " to turn on or off the automatic wind left/right function. After turning it on, the wind
left/right indicator light and the icon will light up, and vice versa, it will be turned off.
Kind reminder
ON/OFF
MODE
WIND SPEED
ANION
wind UP/DOWN
wind LEFT/RIGHT
TIMER
Select mode: Press “ ” to cycle between cool,
dehumidification, air supply, and heating.
Cool mode: The cool indicator light and icon light up, the air conditioner operates according to the set
parameters, the target temperature is set by pressing the "^" or "v" key, and the speed is adjusted by pressing
the "wind speed" key; When the indoor temperature is higher than the set temperature, the compressor starts.
When the indoor temperature is lower than the set temperature, the compressor stops working.
Dehumidification mode: The dehumidification indicator light and dehumidification icon light up, the air
conditioner runs according to the machine's internal program, and the machine defaults to low wind speed
operation.
Air supply mode: The air supply indicator light and icon light up, and the fan runs at the set wind speed. Press
the "wind speed" button to adjust the wind speed. When the air conditioner is in this mode, the compressor
does not work.
Heating mode: The heating indicator light and heating icon light up, and the air conditioner runs heating
according to the set program. Press the "^" or "v" key to set the target temperature, and press the "wind speed"
key to adjust the speed of the wind speed. When the indoor temperature is lower than the set temperature, the
air conditioner starts heating. When the indoor temperature is higher than the set temperature, the air
conditioner stops heating, and the fan continues to run or stops working according to the temperature
detected by the machine.
Timed OFF: When turned on, press the button to activate the timer setting, and the timer indicator light will
flash,The display screen displays the set time. Press the "^" and "v" keys to set the target time. Each time the "^"
or "v" keys are pressed, the time increases or decreases by 1 hour. After stopping the operation for 5 seconds, the
timer indicator light will remain on, the timer function will start, and the top panel will restore the set target
temperature (the set temperature during cooling will also be displayed in air supply and dehumidification
mode). The front display screen will restore the ambient temperature, and the machine will automatically shut
down once the timer duration is reached, The timing range is 0-24 hours (note: the timer function is cancelled
when set to 0 hours).
Timed ON: In the shutdown state, press the button once to activate the timer setting. The timer indicator
light will flash and the display screen will display the set time. Press the "^" and "v" buttons to set the target time.
Press the "^" or "v" button every time, the time will increase or decrease by 1 hour. After stopping the operation
for 5 seconds, the timer indicator light will remain on, and the timer function will start. The timer time will last
until the machine starts automatically, with a timer range of 0-24 hours. (Note: When setting 0, the timer function
is cancelled); When the machine is turned on at a scheduled time, its functions can be preset.
COOL DEHU FAN HEAT
1.When the air conditioner is heating, it needs to be connected to a heat pipe to
exhaust the cold air to the outside.
2.When the air conditioner is cooling, in order to reach better cooling effect, it is
necessary to install heat pipe on the machine to guide the hot air to the outside (the
installation method of heat pipes is described later).
If there is any problem,
pls contact us:
[e-mail]