PORTABLE AIR CONDITIONER USER MANUAL
Use Environment Safety Instructions Product Specifications Name Of Each Part control panel Remote control Operation other functions Preparation for using remote control Precautions for using remote control Cleaning and maintenance Installation precautions Preparation before installation Drainage method Installation and removal of heat discharge pipe Precautions for installing heat discharge pipe Install window isolation panels Troubleshooting
Use Environment ●This air conditioner is suitable for temperature range of 32-95℉ ●This air conditioner is only suitable for family rooms and is not suitable for commercial or industrial purposes. ●At least 50cm of space should be reserved in front of and behind the air conditioner. ●Avoid using in damp environments; Avoid direct sunlight. ●Please keep the air inlet and outlet clean and free of obstacles. ●Please close the doors and windows when using to improve the cooling/heating effect.
Name Of Each Part Of The Product Front Control Panel Back Control Panel Mode indicator light COOL H FAN L M DEHU mode MODE Timer indicator light Timer button Wind speed indicator light speed button SPEED AUTO HEAT LEFT/RIGHT indicator light ON/OFF button ANION TIMER WIND UP/DOWN UP/DOWN sweeping buttons UP/DOWN indicator light WIND L/R ON/OFF LEFT/RIGHT sweeping buttons Reduce ADD button button Front display window display screen logo mode indication status indication control
ON/OFF When the power is turned on, the machine emits a beep sound (refer to the power parameters on the nameplate to connect to the power), and the machine enters standby mode. At this time, the machine can be controlled using the control panel or remote control. Press the standby button , the machine will start up, enter default mode, and the corresponding indicator light will light up; Press the standby button again, the machine stops working, enters the shutdown state, and all indicator lights turn off.
OTHER FUNCTIONS Defrost The machine has an automatic defrosting function, which automatically detects the temperature and determines whether defrosting is needed during operation, ensuring that the machine still has good heating performance even in low ambient temperatures. Note: This key is invalid in air supply and dehumidification mode. Anti freezing protection This machine has anti freezing protection function.
Inspection before the usage season 1.Check if the air inlet and outlet are blocked. 2.Check if the plug and socket are in good condition. 3.Check if the filter is clean. 4.Check if the remote control is equipped with a battery. 5.Check if the heat pipe is damaged and if it is securely installed. Inspection after the usage season 1.Cut off the power supply of the air conditioner. 2.Clean the filter frame and shell. 3.
Preparation before installation Drainage method Tip: Please check if the accessories are complete before installation. Accessories List When operating in cool mode, manual drainage is generally not required, but when operating in high temperature and high humidity environments, there may be a situation of water full, which requires manual or continuous drainage. When operating for a long time in dehumidify mode, it is necessary to connect a drainage pipe for drainage.
Precautions for installing heat discharge pipe Installation and removal of heat discharge pipe In order to improve refrigeration efficiency, the installation of heat pipes should be as short and flat as possible, without distortion, and to maintain the smoothness of the heat discharge pipe. Installation 1.Tighten the heat discharge pipe counter-clockwise joint counterclockwise to either end direction of the heat discharge pipe. Heat discharge pipe Exhaust pipe joint 2.
Install window isolation panels 1.After threading the screw through the hole on the isolation plate A, place a flat gasket on the screw and tighten the nut. Be careful not to hold the nut to the bottom, leaving a 2-3mm gap. 4. Adjust the position of plates A and C on board B through the sliding groove on board B to reach the required length. Then, tighten the butterfly nut clockwise to the end to firmly fix the relative positions of plates A, B, and C.
OTHER FUNCTIONS General analysis Please press the following table for troubleshooting before contacting the maintenance. If the problem still cannot be solved, please contact the dealer or professional in time. Cooling (heating) is not good Low voltage? Wait for the voltage to return to normal. Proper temperature? Adjust to the proper temperature. Dirty filter? Clean the filter Doors and windows are closed? Close the doors and windows. Pipe is outside? Let the pipe outside.
