BEFORE FIRST USE: Pleads leave the dehumidifier sitting outside the box for 24 HOURS before plugging tin. The dehumidifiers may have been tilted or placed upside down during shipping. Leave The dehumidifier sits for 24 hours so the oll in the compressor can settle from the move, Not doing so can affect the performance or lifespan of the dehumidifier, NOTE: To continuously improve its products, LUMBAR reserves the right to modify this information without prior notification.
Welcome Thanks for choosing LUMBAR dehumidifier! LUMBAR is dedicated to keeping people healthy, comfortable and more enjoyable by offering quality appliances ranging from dehumidifiers to ice makers, and more. From breathing easier In your office fo upgrading your kitchen appliances, we hope LUMBAR could help you every step of the way. READ THIS MANUAL INSTRUCTION CAREFULLY BEFORE USING THE UNIT.
Table of Contents MARCHIONESS. cc. crv 1 Safety 2 Instructions For Repairing Appliances 5 Machine Structure 7 Operation Instruction Drainage Mode. Repair and Maintenance... 13 Troubleshooting... eccentric excrescences 14 Safety Precautions...
LILO Thank you for choosing the dehumidifier by LUMBAR! We hope it will bring great convenience te your work and life. We recommend that you save the user manual properly for future reference. Before using this product, please read the user manual carefully to ensure that this product functions at its best.
Safety Awareness VERY IMPORTANT! Please do not install or use your dehumidifier before you have carefully read this manual. Please keep this instruction manual for an eventual product warranty and for future reference. Warning Do not use means to accelerate the defrosting process or to clean, other than those recommended by the manufacturer.
#Repairs must be performed based on the recommendation from the manufacturing company. Maintenance and repairs that require the assistance of other qualified personnel must be performed under the supervision of an individual specified in the use of flammable refrigerants. «Ducts connected to an appliance shall not contain a potential ignition source. #WARNING-Risk Of Fire. Flammable Refrigerant Used. To Be Repaired Only By Trained Service Personnel. Do Not Puncture Refrigerant Tubing. «WARNING-Risk Of Fire.
. The appliance shall be installed in accordance with national wiring regulations. 10. Recycling ®/ — This marking indicates that this product should not be disposed with other household wastes. To prevent possible harm to the environment or human health from uncontrolled waste disposal recycle it responsibly to promote the sustainable reuses of material resources. To return your used device, pleases use the return and collection systems or contact the retailer where the product was purchased.
Instructions For Repairing Appliances Containing R32 General Instructions ® Checks to the area Prior to beginning work on systems containing flammable refrigerants, safety checks are necessary to ensure that the risk of ignition is minimized. For repair to the refrigerating system, the following precautions shall be complied with prior to con-ducting work on the system.
Safety Information « Install the dehumidifier on flat surface to minimize vibration and or noise. » Inspect the power cord before use. Never operate the dehumidifier when the power cord or plug is damaged. © Insert the three-prong plug on the power cord into a matching electrically grounded outlet {115V/ least). » Do not use an adapter. Never cut off the third prong. Do not use an extension cord. + Do not operate the dehumidifier in standing water. Keep motor and wiring dry.
Machine Structure Diagram Parts Description Top cover plats Control Pansy Decorative plate SRR Soi —Air Inlet Rear door panel Power Cord Port Rear view of the machine NOTE: There May be slight differences in the model, the actual machine shall prevail.
Boise ale Operation Humidity Setting : In power-on status, press "Up" or "Down" button to enter the humidity setting status: The screen will display the "Setting" and " Humidity Display" icon, the unit icon "RH%" will light up, and the large figure " Zc " will flash to show the humidity value. In humidity setting status, you can press the "Up" or "Down" button to set the desired humidity within the range of 10-88RH%.
Status Description : When the fan is delayed, the running symbol * & " will flash, and if the fan is running. the running symbol * # "will be on. otherwise it will be off. When the compressor is delayed, the humidification symbol * & " will flash, and if the compressor is running, the humidification symbol " & " will be on, otherwise it will be off. If the ambient humidity is lower than the setting humidity and the compressor is stopped, the Humidity Control Symbol " will flash, otherwise it will be off.
Water Full Protection Function: ‘When the water tank is full, the machine stops, and the water full indicator light £# flashes; when the water full is released, the water full indicator light ©" goes out, and the machine can be restarted. Note: The water tank needs to be placed in place normally, otherwise it will also cause the full water protection.
Drainage Mode » Water tank drainage operation instructions » Put your hard on the gap of he water pen the front lower door pans! frat. taro, gorily pul cut the wane tank, and Lift the kart handle. ba cane 1 hid Fo taro tank afford. o dé Ivory the dark to em pl the water: Ciaos the door anal fo complete the: ‘water tank drainage. Note: Do not remove the float ball in the water tank, otherwise the water sensor will not be able to sense the water level normally, resulting In overflow of water.
Image One: Error Connection example ground « The water pips upward arch position D above position B, the inside of the water pipe is prone to alr and accumulation, which leads to a smooth discharge through the Pipe.
Repair and Maintenance Note: Unplug the power cord before servicing and cleaning the product. Please use a soft damp cloth to clean the body of the dehumidifier. -Do not use detergent, scrubbing steel wire, chemically treated dust cloth, gasoline, benzene, thinner or other solvents to clean and wipe the machine. Clean the filter -The filter is used to block most airborne dirt, such as dust, smoke, animal dander, mold spores and pollen; Regular inspections and cleaning at least once a month is recommended.
Troubleshooting 4 Before seeking support from the service team, you can check the following troubleshooting tips: Fault Cause Please provide the fault Dehumidifier 1. The fuel is blown a not working 2. Machine failure prompt re macabre 1. Clean the filter; 2. Remove obstacles; hy Air filter fouling: \ 3. Close the doors and . There are obstacles in windows, the Dehumidifying the air inlet and outlet humidification effect es nol of the dehumidifier; of the confined spaces 3.
Safety Precautions 1, When using, do not place the dehumidifier on soft, uneven ground to naval vibration or movement. 2. Do not use thin rods or hard ‘objects to Insert Into the fuselage to avoid malfunction or danger. TREE 3, When using, please keep the dehumidifier away from heat sources such as heaters and electric kettles to save electricity. 4, When using, pleas dose the doors and windows to achieve the best humidification effect. i: 1 7.
SY LUMBAR offers a limited 1-year free warranty on this DE190L dehumidifier, with original proof of purchase (typically you maybe only requested to offer the order number or other information to prove a genuine purchase, instead of an invoice) and where a defect has arisen, wholly or substantially, as a result of faulty manufacture, parts or workmanship during the warranty period.
