MADE IN CHINA ©2021 J & J Global, LLC Distributed By: J & J Global, LLC Dallas, TX 75234
Golden Tube Wall Mounted Patio w/ Remote Sku: 101017 Read the instructions and precautions before use of this product Please keep this instruction manual for future reference For warranty information, please refer to the back page of this instruction manual.
Warning Instructions Important Instructions Warranty by EzReplacemnet.com does not cover the defects arising out of the improper use the appliance. The warranty does not cover the situations below: 1. The damages and defects arising out of improper use. 2. The damages and defects having occurred during the transportation after the delivery of the product to the customer by the company. 3.
Important Instructions (Continued) -Always ensure the heater is plugged into a suitable socket, one that is tested for outdoor use. -To disconnect heater, turn controls to OFF, then remove plug from socket. Do not unplug by pulling on the power cable. -Always unplug the unit and ensure the unit is completely cold before moving, cleaning or storing. -This heater is intended for domestic use only and should not be used commercially for contract purposes.
1 Operating Instructions Turn heater on by pressing the rocker switch to the “-” position Installation Instructions According to the product installation location, use percussion drilling to make three diameter 8mm round holes. Definitions of the Buttons on the Remote Control The functions of the heater may be controlled via the buttons on your remote control and LED screen. You may also control some of the functions of your heater through the buttons on the front side of the heater. 1.
3 5 Attaching Bracket To Wall Use ST4*35 screws to attach bracket to wall as shown below. Be sure brackets are securely attached. 4 Attaching Bracket To Heater Before attaching bracket to heater, make sure the rocker switch is on the right side then attach the bracket to heater using the two M6*14 screws and butter fly nuts.
