Use and Care Manual
1
Attaching Bracket
Use two M5*12 screws to install the aluminum bracket to the back side of heater body
as below figure shows.
Attaching Support Pole
Using M6*44 screws to install the aluminum bracket and heater body to the pole as
shown below.
2
5
Remote Control Operation
Definitions of the Buttons on the Remote Control
The functions of the heater may be controlled via the buttons on your remote control
and LED screen. You may also control some of the functions of your heater through the
buttons on the front side of the heater.
Remote Control
1. On/Off Switches heater on or off.
2. After turning heater on, this turns on low heating.
3. After turning heater on, this turns on medium heating.
4. After turning heater on, this turns on high heating.
5. Turns on timer option, heater turns off after selected time has expired.
1
2
4 5
3
7 4