MADE IN CHINA ©2021 J & J Global, LLC Distributed By: J & J Global, LLC Dallas, TX 75234
Adjustable Height Carbon Fiber Standing Patio Heater W/ Remote Sku: 101013 Read the instructions and precautions before use of this product Please keep this instruction manual for future reference For warranty information, please refer to the back page of this instruction manual.
Warning Instructions Important Instructions Warranty by EzReplacemnet.com does not cover the defects arising out of the improper use the appliance. The warranty does not cover the situations below: 1. The damages and defects arising out of improper use. 2. The damages and defects having occurred during the transportation after the delivery of the product to the customer by the company. 3.
Important Instructions (Continued) Cleaning and Maintenance Instructions -Always ensure the heater is plugged into a suitable socket, one that is tested for outdoor use. -To disconnect heater, turn controls to OFF, then remove plug from socket. Do not unplug by pulling on the power cable. -Always unplug the unit and ensure the unit is completely cold before moving, cleaning or storing. -This heater is intended for domestic use only and should not be used commercially for contract purposes.
Remote Control Operation Definitions of the Buttons on the Remote Control The functions of the heater may be controlled via the buttons on your remote control and LED screen. You may also control some of the functions of your heater through the buttons on the front side of the heater. 1 Attaching Bracket Use two M5*12 screws to install the aluminum bracket to the back side of heater body as below figure shows. Remote Control 1. On/Off Switches heater on or off. 2.
3 Correct Installation Positions Use two M5*12 screws to install the decorative support to the back side of heater body as shown below. 4 Operating Instructions Plug the power cord into the outlet Press the rocker power switch to “-” position, and the switch indicator light will be on, indicating power is on.
