User Friendly Interface Download Product Manuals Email your questions or concerns File Warranty Claim Follow-up within 24 Hrs. Parts Ship within 48 Hrs.
Adjustable Height Carbon Fiber Standing Patio Heater W/ Remote Sku: 101013 Read the instructions and precautions before use of this product Please keep this instruction manual for future reference For warranty information, please refer to the back page of this instruction manual.
Important Instructions 1.Safety warnings READ ALL INSTRUCTIONS BEFORE ATTEMPTING TO OPERATE THIS UNIT. KEEP THE ASSEMBLY INSTRUCTIONS FOR FUTURE REFERENCE. KEEP THE ASSEMBLY INSTRUCTIONS FOR FUTURE REFERENCE. KEEP THE ORIGINAL PACKAGING FOR USE WHEN STORING THE HEATER DURING EXTENDED PERIODS OF NON-USE. -Do not leave this unit unattended when in use. -This heater will get hot when in use. Do not touch hot surfaces. -Caution: Some parts of this product can become very hot and cause burns.
Important Instructions (Continued) -Always ensure the heater is plugged into a suitable socket, one that is tested for outdoor use. -To disconnect heater, turn controls to OFF, then remove plug from socket. Do not unplug by pulling on the power cable. -Always unplug the unit and ensure the unit is completely cold before moving, cleaning or storing. -This heater is intended for domestic use only and should not be used commercially for contract purposes.
1 Attaching Bracket Use two M5*12 screws to install the aluminum bracket to the back side of heater body as below figure shows. 8"3/*/( 0QFSBUPS QBOFM GBDF VQ OPU VQTJEF EPXO 2 Attaching Support Pole Using M6*44 screws to install the aluminum bracket and heater body to the pole as shown below.
3 Correct Installation Positions Use two M5*12 screws to install the decorative support to the back side of heater body as shown below.
4 Operating Instructions Plug the power cord into the outlet Press the rocker power switch to “-” position, and the switch indicator light will be on, indicating power is on.
5 Remote Control Operation Definitions of the Buttons on the Remote Control The functions of the heater may be controlled via the buttons on your remote control and LED screen. You may also control some of the functions of your heater through the buttons on the front side of the heater. Remote Control 1. On/Off Switches heater on or off. 2. After turning heater on, this turns on low heating. 3. After turning heater on, this turns on medium heating. 4. After turning heater on, this turns on high heating. 5.
Cleaning and Maintenance Instructions Attention! Careful and regular maintenance of infrared Heater is required to attain a long and efficient operation of your appliance. 1. Check the cleanliness of the reflector and IR-filament at least once a month. If necessary, apply cleaning and maintenance instructions. 2. The number of checks may be increased considering the amount of the dust in the environment. 3. Check the deformation of the reflector, wire and frame visually while cleaning the appliance.
Warning Instructions Warranty by EzReplacemnet.com does not cover the defects arising out of the improper use the appliance. The warranty does not cover the situations below: 1. The damages and defects arising out of improper use. 2. The damages and defects having occurred during the transportation after the delivery of the product to the customer by the company. 3.
For manuals, replacement parts, customer service, or warranty information for this product, please visit our website: http://www.ezreplacement.
