Instructions / Assembly

8
Cleaning
Metal:
⚫ Buff using a soft cloth, slightly dampened with a citrus oil-based product.
⚫ DO NOT use brass polish or household cleaners as these will damage the metal.
Glass:
• Use glass cleaner and dry thoroughly with a paper towel or lint-free cloth.
• NEVER use abrasive cleansers or any cleaner that could scratch the surface.
Plastic:
• Wipe with a slightly damp cloth and a mild solution of dish soap and warm water.
• NEVER use abrasive cleansers or any cleaner that could scratch the surface.
Vents:
• Use a vacuum or duster to remove dust and dirt from the heater and vent areas.
• Clean the exterior of the stove with a slightly damp cloth or duster.
Maintenance
Risk of electric shock! DO NOT OPEN the main panels! No user-
serviceable parts inside!
Electrical and Moving Parts:
• The fan and motors are lubricated at the factory and will not require more oil.
• Except for the light bulb, all electrical parts and components are integrated into
the heater and are not serviceable by the consumer.
Storage:
• Store heater in a clean dry place when not in use.
Light Bulb Inspection and Replacement
The flame effect is created by one 40-Watt light bulb with an E-12 (small) socket base.
Use only this type of light bulb. If the flame effect does not work, the bulb may have
come loose or been damaged during shipping.
Light bulb becomes very hot during use. Allow at least 10 minutes for
the bulb to cool before touching.
To inspect or replace the bulb, first unplug the power cord from the outlet. Locate the
access panel on the back of the stove. Remove the screws and the panel. Check the
bulb to be sure it is finger tight and in working order. Replace any damaged or faulty
bulb. Reattach the access panel. Do not operate this heater without the access panel in
place. Do not remove the back cover. There are no serviceable parts inside.