Operation Manual

UN PROBLEME ? 4
N’hésitez pas à nous appeler sur notre ligne d’assistance téléphonique (tel en fin de notice).
Nos techniciens se feront un plaisir de vous aider à parfaire votre installation.
The easiest way to get to know the system
and get it up and running quickly is to get all
the devices and accessories programmed on
a tabletop before locating and mounting them.
Kit Contents
The Alarm System HA2000 should contain the
following components:
 1 x RTC Dialler HA2000RTC
 Extra Fixing pack
 Phone cable
 Batteries (4* alkaline D cells)
Application Overview
I. Identifying the parts
1. Yellow LED
 Power Indicator; the Yellow LED will light
up for 2 seconds Power is on.
 Test Mode Indicator; Yellow LED flashes
when in Test Mode.
 Yellow LED flashes every 3 seconds to
indicate Report Faillure.
 Yellow LED flashes every 30 seconds to
indicate Low Battery
2. Red LED
Red LED will flash when in recording , playing
messages, reporting and when the phone is off-
hook.
3. Numeric keys
4. “ ” Key
In Normal Mode, press this key to set Telephone
number and Terminal Polarity.
5. CLR Key
Use this key for deleting a digit, canceling the
selection, aborting the current application and
returning to the Normal mode etc.
6. TEST Key
In Normal mode, press this key to enter TEST
mode.
7. REC Key
Press this key to start recording emergency
messages.
8. # Key
To dial as entered
9. * Key
To delay the dialling for 3 seconds.