User's Manual

TABLE OF CONTENTS
WHAT’S IN THE BOX & THE BASICS
MOUNTING YOUR FLEXTILT HEAD
MOUNTING THE CAMERA TO YOUR FLEXTILT HEAD
ADJUSTING TENSION OF YOUR FLEXTILT HEAD
CAUTIONS AND TIPS
USE WITHOUT A TRIPOD
1.
2.
3.
4.
5.
6.
DISCLAIMER
edelkrone cannot be held responsible for damage caused by improper use or
modification of the product.
For more infromation and tips about your FlexTILT Head 2, please watch
the user’s manual video at: manuals.edelkrone.com
www.edelkrone.com
1. WHAT’S IN THE BOX & THE BASICS
1
2
3
4
6
7
8
9
10
5
1.
2.
3.
4.
5.
1/4” - 20 Mounting screw
Spirit level
2.5mm Adjustment joints (x2)
Pan marking
3/8” - 16 Mounting port
6.
7.
8.
9.
10.
3mm Adjustment joints (x6)
Mounting wheel
3mm allen wrench
2.5mm allen wrench
Reducer bushing/adapter* x2
*1/4”-20 to 3/8”-16 mounting screw adapter and 1/4”-20 reducer bushing
for mounting port are provided.
2. MOUNTING YOUR FLEXTILT HEAD 2
1.
2.
3.
Place your FlexTILT Head 2 on the screw.
Rotate clockwise to tighten.
Continue rotating until it is tightened.
A detailed video explaining the mounting process can be found at:
manuals.edelkrone.com
1
2
A detailed video explaining the mounting process can be found at:
manuals.edelkrone.com
1. 2.
3. MOUNTING THE CAMERA TO YOUR FLEXTILT HEAD 2
When you are adjusting height, adjust one point at a time. (a,b,c)
Unfold the FlexTILT Head 2 to
access the mounting wheel.
Attach your camera using
the mounting wheel.
a
b
c
1
2