Owners manual

2017+ GM ECM Removal
The ECM on 2017 GM vehicles requires modification to support flash capability.
Follow these instructions carefully to remove, package and ship the ECM to
Edelbrock.
1. Disconnect the negative battery terminal and isolate the negative cable so it
does not come in contact with the battery terminal or body of the vehicle.
2. Locate the ECM and remove the main harness connections.
3. Remove any hardware securing the ECM to its mounting location.
4. Fill out the provided ECM identification label with customer and vehicle
information and apply directly to the ECM.
5. Place the ECM in the provided box with packing material so the ECM cannot
move around in the box. Ship ECM to Edelbrock using the provided return
shipping label.
IMPORTANT: The ECM is returned calibrated and ready for reinstallation. DO
NOT attempt to load any other calibrations into the computer without consulting
the Edelbrock calibration department.
After supercharger installation is complete, install the provided OBDII cap
on the vehicle’s OBDII port to avoid accidental tampering by dealerships
and other service centers.
Edelbrock E-Force Supercharger System
2016-17 Chevy Camaro LT1 6.2L
Installation Instructions