Owners manual
©2017 Edelbrock LLC
Brochure #63-1570
Rev. 5/17/17 - NP
Edelbrock E-Force Supercharger System
2014-2017 Chevy Corvette C7 LT1 6.2L
Installation Instructions
Page 19
25. Using side cutters, remove the wire ties securing the
engine harness to the top engine cover.
26. Using a deep 10mm socket, remove four (4) side cover
bolts.
27. Unplug the EVAP solenoid harness. Remove the EVAP
hose from the EVAP solenoid and from the firewall.
28. Unplug the Throttle Position sensor harness. Disconnect
and remove the Inlet to Valley PCV hose.
29. Using a 10mm socket, remove ten (10) bolts securing
the intake manifold to the cylinder heads.
30. Carefully lift up the manifold and disconnect the brake
booster hose from the rear of the manifold. Once the brake
booster hose is disconnected, remove the manifold and set
aside.