Owners manual

Part #1565, 1566, 1519, 15192

Brochure #63-1565

Rev. 5/17/17 - NP

Edelbrock E-Force Supercharger System

2014-2017 GM Truck & SUV 1500

5.3L and 6.2L Installation Instructions

Page 23

93. Place the shroud back onto the support brace and pull

back the rubber weather guard. Using a marker, mark the

relief cutouts for the LTR hoses. Reliefs should be

approximately 1.5” wide and 1/2” below the LTR barbs.

94. Trim the shroud using an appropriate cutting tool. Test

fit the LTR hoses to verify proper shroud to hose clearance.

Reinstall the weather guard and trim the rubber weather

guard as needed. Re-secure shroud to support brace using

the factory fasteners.

95. Install the LTR to Manifold hose to the top LTR barb and

secure with a hose clamp from Bag #2. TIP: Use the hose

routing diagram to reference how to clock these hoses.

96. Install the LTR to Water Pump hose to the lower LTR

barb and secure with a hose clamp from Bag #2. TIP: Use

the hose routing diagram to reference how to clock these

hoses.

97. With the LTR secured to the support brace, carefully

reposition the support brace by feeding the LTR hoses

through the cavity between the radiator and the windshield

washer fluid tank.

98. Re-secure the support brace to the chassis using the

factory hardware.