Owners manual

Part #1565, 1566, 1519, 15192

Brochure #63-1565

Rev. 5/17/17 - NP

Edelbrock E-Force Supercharger System

2014-2017 GM Truck & SUV 1500

5.3L and 6.2L Installation Instructions

Page 22

86. Using the SUV LTR brackets and four (4) M6 x 10mm

bolts from Bag #2, loosely secure the LTR brackets to the LTR.

87. Using a 10mm socket, remove two (2) bolts securing

the top of the shroud to the support brace. Position the

upper SUV LTR brackets between the support brace and

the shroud. Loosely secure them using the stock bolts.

88. Using two (2) M6 x 16mm hex flange bolts from Bag

#2, loosely secure the lower LTR brackets to the support

brace where the push pins were removed from Step 84.

89. Adjust the LTR as needed. With the LTR properly

aligned, securely fasten all LTR bolts. Proceed to Step 93.

Steps 90-92 will outline the procedure to secure the

Low Temp Radiator (LTR) on Truck applications.

90. Using the LTR brackets and four (4) M6 x 10mm bolts

from Bag #2, loosely secure the LTR brackets to the LTR.

91. Using a 10mm socket, remove two (2) lower bolts on

the support brace. Using the same bolts, loosely secure the

lower LTR brackets to the support brace. Using two (2) M8

x 16mm BHCS bolts and two M8 washers from Bag #2,

loosely secure the upper LTR brackets to the support

brace.

Stock Bolt

SHCS Bolt

92. Place the shroud back onto the support brace and

adjust the LTR as needed. With the LTR properly aligned,

remove the shroud and securely fasten all LTR bolts.

Proceed to Step 93.