Owners manual

Part #1565, 1566, 1519, 15192

Brochure #63-1565

Rev. 5/17/17 - NP

Edelbrock E-Force Supercharger System

2014-2017 GM Truck & SUV 1500

5.3L and 6.2L Installation Instructions

Page 18

66. Remove four (4) additional bolts securing the grill

assembly using a 10mm socket. TIP: These need to be

removed from the bottom of the vehicle.

67. With the help from an assistant, carefully disengage

the front fascia assembly and remove. Proceed to Step 74.

TIP: Grill will detach with the fascia as an assembly.

NOTE: Steps 68-73 will outline the procedure to remove

the front facia on SUV applications. Disregard otherwise.

68. Using a panel puller, remove twelve (12) push pins

securing the top shroud.

69. Using a 10mm socket, remove four (4) bolts securing

the top of the grill assembly. Some applications with have

a total of six (6) bolts.

70. Using a 7mm socket remove six (6) screws, per side,

securing the wheel well liner to the facia. The wheel well

liner does not have to be completely removed.

71. Using a panel puller, remove two (2) push pins (GREEN

ARROW) securing the wheel well liner to the bottom of the

facia. Using a 10mm socket, remove four (4) bolts (RED

ARROW) securing the wheel well liner to the bottom of the

front fascia and two (2) bolts (YELLOW ARROW) securing the

facia to the chassis.