Owners manual

Part #1565, 1566, 1519, 15192

Brochure #63-1565

Rev. 5/17/17 - NP

Edelbrock E-Force Supercharger System

2014-2017 GM Truck & SUV 1500

5.3L and 6.2L Installation Instructions

Page 12

22. Using a panel puller, disengage four (4) Christmas tree

push pins securing the engine harness to the rear of the

manifold cover. With Christmas trees removed, carefully

remove the intake manifold.

23. Clean the intake port surfaces with a shop rag. Cover

the ports with protective tape to keep out debris.

24. Drain the coolant by removing the petcock located on

the passenger side of the radiator.

25. Remove the two heater hoses located on the passenger

side firewall. Please towels or rags underneath the hoses

to prevent the coolant from getting into the cylinder.

26. Using a 1/2” breaker bar, rotate the tension

counterclockwise and remove the stock drive belt.

27. Using a 15mm socket, remove the factory tensioner.

28. Remove three (3) bolts from the water pump using a

13mm socket.

29. Using Blue thread locker and three (3) M8 x 130mm

SHCS bolts from Bag #1, secure the FEAD bracket to the

water pump using a 6mm Hex key. Torque bolts to 22

ft-lbs.

30. Remove the factory bolt securing the alternator bracket

using a 15mm socket.