Owners manual

Part #1565, 1566, 1519, 15192

Brochure #63-1565

Rev. 5/17/17 - NP

Edelbrock E-Force Supercharger System

2014-2017 GM Truck & SUV 1500

5.3L and 6.2L Installation Instructions

Page 11

16. Using a flathead screwdriver, loosen the worm clamps

on the air inlet tube and remove the assembly from the

throttle body and airbox.

17. Unplug the throttle body harness connector from the

throttle body assembly.

18. Unplug the MAP harness connector from the MAP

sensor. Remove the EVAP hose from the EVAP solenoid and

unplug the EVAP harness connector. TIP: EVAP solenoid is

located under the MAP sensor.

MAP

19. Detach the PCV hose located on the valley plate. On

5.3L applications the hose connects to the driver side of the

intake manifold. On 6.2L applications, it connects to the

front of the intake manifold.

5.3L

6.2L

20. Detach the engine harness from the sides of the

manifold cover using a panel puller. OPTIONAL: The wire

ties securing the harness to the manifold cover can be

removed altogether.

21. Using a 10mm socket, remove ten (10) bolts securing

the intake manifold to the cylinder heads.