Owners manual

Part #1565, 1566, 1519, 15192

Brochure #63-1565

Rev. 5/17/17 - NP

Edelbrock E-Force Supercharger System

2014-2017 GM Truck & SUV 1500

5.3L and 6.2L Installation Instructions

Page 2

Due to the complexity of the Edelbrock E-Force Supercharging system, it is recommended that this system only

be installed by a qualified professional with access to a service lift, pneumatic tools, and a strong familiarity with

automotive service procedures. To qualify for the optional supplemental warranty, it is necessary to have this

system installed by a Certified ASE Technician at a licensed business, GM Dealership, or an Authorized Edelbrock

Installer. Failure to do so will void and/or disqualify any and all optional supplemental warranties offered with

this system. Please contact the Edelbrock Technical Support department if you have any questions regarding

this system and/or how your installer of choice will affect any warranty coverage for which your vehicle may

qualify.

Proper installation is the responsibility of the installer. Improper installation will void all

manufacture’s standard warranties and may result in poor performance and engine or vehicle

damage.

Inspect all components for damage that may have occurred in transit before beginning

installation. If any parts are missing or damaged, contact Edelbrock Technical Support, not your

parts distributor.

Any equipment that directly modifies the fuel mixture or ignition timing of the engine can cause severe engine

damage if used in conjunction with the Edelbrock E-Force Supercharger System. This includes, but is not limited

to: OBDII programmers, MAF sensors, adapters and any other device that modifies signals to and/or from the

ECU. Aftermarket bolt-on equipment such as underdrive pulleys or air intake kits will also conflict with the

operation of the supercharger and must be removed prior to installation. Use of any of these products with the

E-Force Supercharger could result in severe engine damage.

Any previously installed aftermarket tuning equipment must be removed and the vehicle returned

to an as stock condition before installing the supercharger.

Before beginning the installation, use the enclosed checklist to verify that all

components are present in the box then inspect each component for damage

that may have occurred in transit. If any parts are missing or damaged, contact

Edelbrock Technical Support (800-416-8628), not your parts distributor.

WARNING: Installation of this supercharger will result in a significant change to the

performance characteristics of your vehicle. It is highly recommended that you take some

time to familiarize yourself with the added power and how it is delivered. This must be

done in a controlled environment. Take extra care on wet and slippery roads as the rear

tires will be more likely to lose traction with the added power. It is never recommended to

turn off your vehicles traction control system.

IMPORTANT WARNINGS