User`s guide

40
Chapter 5: Specifications General
General
This section presents the general specifications of the Ectane
®
2.
System
Power Requirements
Warm-up
a
a. The warm-up time corresponds to the time required by the unit to reach its optimal accuracy after it is turned on. Eddyfi
recommends waiting until the end of the warm-up period before balancing probes or performing acquisitions.
15 minutes
Workstation link Ethernet 1000BASE-T
Transfer rate on Ethernet cable 1 Gbps
Power configuration 100 W external AC/DC power supply of
15 VDC or battery (removable)
Voltage 100 – 240 VAC, ±10 %
Frequency 50 / 60 Hz
Maximum input current 1.5 A
Battery type Lithium-ion, rechargeable, 
DOT-compliant
Battery autonomy
a
a. Typical (with two batteries in the instrument)
8 hours