Safety Data Sheet Article 20204819

EC safety data sheet
Trade name: edding 950 industry painter Colours: black, red, blue, yellow, white
Current version : 3.1.0, issued: 14.03.2012
Replaced version: 3.0.0, issued: 07.11.2011
Region: GB
Page 3 of 8
Unsuitable extinguishing media
No data available.
5.2
Special hazards arising from the substance or mixture
None known
5.3
Advice for firefighters
Use self-contained breathing apparatus. Wear protective clothing.
SECTION 6: Accidental release measures
6.1
Personal precautions, protective equipment and emergency procedures
For non-emergency personnel
Refer to protective measures listed in sections 7 and 8. Avoid contact with skin, eyes and clothing. Ensure adequate
ventilation.
For emergency responders
No data available. Personal protective equipment (PPE) - see Section 8.
6.2
Environmental precautions
Do not discharge into the drains/surface waters/groundwater.
6.3
Methods and material for containment and cleaning up
Take up with absorbent material (e.g., sand, kieselguhr, universal binder). When picked up, treat material as
prescribed under heading "Disposal considerations".
6.4
Reference to other sections
No data available.
SECTION 7: Handling and storage
7.1
Precautions for safe handling
Advice on safe handling
Provide good ventilation of working area (local exhaust ventilation, if necessary). Product inherent handling risks must
be minimised taking the appropriate measures for protection and preventive actions. The working process should be
designed to rule out the release of hazardous substances or skin contact as far it is possible by the state of the art.
General protective and hygiene measures
Do not eat, drink or smoke during work time. Keep away from foodstuffs and beverages. Avoid contact with eyes and
skin. Remove soiled or soaked clothing immediately. Wash hands before breaks and after work.
Advice on protection against fire and explosion
Keep away from sources of heat and ignition.
7.2
Conditions for safe storage, including any incompatibilities
Technical measures and storage conditions
Keep container tightly closed and dry in a cool, well-ventilated place. Protect from heat and direct sunlight.
Requirements for storage rooms and vessels
Containers which are opened must be carefully resealed and kept upright to prevent leakage. Always keep in
containers of same material as the original one.
Advice on storage assembly
Do not store together with: Acids; Bases; Oxidizing agents
7.3
Specific end use(s)
No data available.