User guide

3 Second Headboard:
Position Headboard with knob facing in. Repeat Steps 1 and 2 for
o
ther Headboard
(
Figure 3).
3
4
4 Casters:
Locate two Casters with locks (Figure 4).
Locate four holes at bottom of Headboards. Push two
Casters with locks into the holes diagonally from one
another (Figure 4a).
Push r
emaining two Casters in the opposite holes. Stand
Wood Frame upright.
4
To Assemble Wood Frame
(continued)
Locks
4a
5 Storage Area:
Locate Storage Skirt and Storage Board. Slide Storage Board
into opening of Skirt (Figure 5).
Place covered Storage Board on Bottom Rail Assembly and
arrange ruffles of Skirt over Rails. Tie a bow around each
corner
(Figure 5a).
5
Storage
Board
5a
6 Music Module:
Slide Music Module over plastic mount with battery door
toward outside
(Figure 6).
Remove battery door, using a Phillips head screwdriver
(Figure 6a). NOTE: Do not replace battery door yet.
6 6a
Battery Door
8
8 Slide Locks:
Locate Slide Locks and orient with their concave sides facing
in. T
ilt Slide Lock and pivot fir
mly onto the knob
(Figur
e 8).
Repeat on other side.
Diagonally
7
7 Secur
e Music Module:
Secure Music Module with two Mounting screws, but do not
over tighten
(Figure 7).
Music Module
Mounting Scr
ew
(2)
Knobs Face In