Replacement Part List

ManualsBrandsEDCO ManualsMiscellaneous Parts18 in. Blade Walk Behind Concrete Saw Downcut with Honda GX390 Gas Engine

E-KL18-PL-0419

Page 1

800-638-3326 • edcoinc.com • techsupport@edcoinc.com

STARTING SERIAL # 190410227

18” DOWNCUT - CONCRETE AND ASPHALT

WALK BEHIND SAW

SKU # MODEL # POWER OPTION

PARTS LIST MANUAL

MODEL KL18

Printed in USA

EQUIPMENT DEVELOPMENT COMPANY, INC.

100 Thomas Johnson Drive, Frederick, MD 21702-4600 USA

Phone: 800-638-3326 or 301-663-1600 • Fax: 800-447-3326 or 301-663-1607

Website: www.edcoinc.com • E-mail: techsupport@edcoinc.com

READ AND UNDERSTAND THE OPERATOR’S SAFETY MANUAL THOROUGHLY

BEFORE ATTEMPTING TO OPERATE THIS EQUIPMENT.

Death or serious injury could occur if this machine is used improperly.

Machine specic Operator’s Instruction Manuals are oered at edcoinc.com/customer-resources/manuals-parts-lists/

READ AND UNDERSTAND THE ENGINE MANUFACTURERS INSTRUCTIONS AND OPERATORS MANUAL BEFORE OPERATION.

39600 KL18-390 HONDA GASOLINE ENGINE MODEL GX390

SHOWN WITH OPTIONAL LIFTING BAIL

Summary of content (20 pages)

PAGE 1
E-KL18-PL-0419 STARTING SERIAL # 190410227 PARTS LIST MANUAL MODEL KL18 SHOWN WITH OPTIONAL LIFTING BAIL SKU # 39600 18” DOWNCUT - CONCRETE AND ASPHALT WALK BEHIND SAW MODEL # KL18-390 POWER OPTION HONDA GASOLINE ENGINE MODEL GX390 READ AND UNDERSTAND THE OPERATOR’S SAFETY MANUAL THOROUGHLY BEFORE ATTEMPTING TO OPERATE THIS EQUIPMENT. Death or serious injury could occur if this machine is used improperly. Machine specific Operator’s Instruction Manuals are offered at edcoinc.
PAGE 2
E-KL18-PL-0419 SAFETY INFORMATION SAFETY MESSAGES • Safety Instructions are proceeded by a graphic alert symbol of DANGER, WARNING, or CAUTION. Indicates an imminent hazard which, if not avoided, will result in death or serious injury. Indicates an imminent hazard which, if not avoided, can result in death or serious injury. Indicates hazards which, if not avoided, could result in serious injury and or damage to the equipment.
PAGE 3
E-KL18-PL-0419 PARTS LIST MANUAL MODEL KL18 TABLE OF CONTENTS Section Page Number Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 How To Order Replacement Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Illustration 1: Main Grouping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4, 5 Illustration 2: Arbor & Blade Guard Grouping . . . . . . . . . . . . . . . . . . . . .
PAGE 4
E-KL18-PL-0419 ILLUSTRATION 1: MAIN GROUPING 800-638-3326 • edcoinc.com • techsupport@edcoinc.
PAGE 5
E-KL18-PL-0419 PARTS LISTING - ILLUSTRATION 1: MAIN GROUPING 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 100008 79013 10009 10306 100003 10907 10811 10025 300036 10055 10156 300035 100006 65239 10312 10155 10347 10154 300034 52081 10317 MAIN FRAME WELDMENT 1 WHEEL, 8 X 2-1/2 X 3/4”BRG.
PAGE 6
E-KL18-PL-0419 ILLUSTRATION 2: ARBOR & BLADE GUARD GROUPING 800-638-3326 • edcoinc.com • techsupport@edcoinc.
PAGE 7
E-KL18-PL-0419 PARTS LISTING - ILLUSTRATION 2: ARBOR & BLADE GUARD GROUP 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 100213 ARBOR ASSEMBLY COMPLETE 69050 ARBOR SHAFT 19-1/4”L 50222 BEARING, BALL 1” TPB 56235 SHEAVE 3.35”OD X 3GR.3V X 1”BORE 100215 KEY 1/4SQ X 2 56308 ARBOR BACKING PLATE 4-1/2” 10211 PIN, ROLL 5/16 X 2 10129 PIN, SHEAR PROOF 3/8 X 1-1/4 (INCLUDED IN ITEM 9 ) 56309 ARBOR BLADE CAP 4-1/2” 55009 WASHER, LOCK, INT.
PAGE 8
E-KL18-PL-0419 ILLUSTRATION 3: ENGINE GROUPING PARTS LISTING - ILLUSTRATION 3: ENGINE GROUPING 1 2 3 300038 10307 65238 ENGINE ASSEMBLY (SEE PAGE 16) KEY 1/4SQ X 2-1/4 SHEAVE 2.8”OD X 3GR.
PAGE 9
E-KL18-PL-0419 ILLUSTRATION 4: HANDLE BAR ASSEMBLY 300034 PARTS LISTING - ILLUSTRATION 4: HANDLE BAR ASSEMBLY 300034 1 2 3 4 5 6 7 8 9 100007 100006 52081 10608 10412 10602 10150 100153 15201 HANDLEBAR WELDMENT LINKAGE WELDMENT HANDWHEEL SUBASSEMBLY (SEE PAGE 13) GRIP, HAND 1” MODEL AT BOLT, CARRIAGE 1/4-20 X 1 WASHER, FLAT 1/4 SAE ZINC NUT, HEX NYLON LOCK 1/4-20 ZINC WATER VALVE & BRKT. ASSEMBLY (SEE PAGE 14) SWITCH, ROCKER ON-OFF, RED 1 1 1 2 2 2 2 1 1 800-638-3326 • edcoinc.
PAGE 10
E-KL18-PL-0419 ILLUSTRATION 5: LIFTING BAIL ASSEMBLY (OPTIONAL) BOLTS ATTACH ON THE LEFT SIDE OF THE MAIN FRAME AND ON THE FRONT OF THE CONSOLE PARTS LISTING - ILLUSTRATION 5: ARBOR & BLADE GUARD GROUP 1 2 3 4 100004 10055 10025 10156 LIFTING BAIL WELDMENT SCREW, CAP 3/8-16 X 1 WASHER, FLAT 3/8 SAE ZINC NUT, HEX NYLON LOCK 3/8-16 ZINC 800-638-3326 • edcoinc.com • techsupport@edcoinc.
PAGE 11
E-KL18-PL-0419 ILLUSTRATION 6: GUIDE BAR ASSEMBLY 300036 PARTS LISTING - ILLUSTRATION 6: GUIDE BAR ASSEMBLY 300036 1 2 3 4 5 100001 50024 11669 10025 10156 GUIDE BAR WELDMENT WHEEL 4 X 1-3/8 X 3/8”BORE SCREW, CAP 3/8-16 X 2-1/2 WASHER, FLAT 3/8 SAE ZINC NUT, HEX NYLON LOCK 3/8-16 ZINC 1 1 1 2 1 800-638-3326 • edcoinc.com • techsupport@edcoinc.
PAGE 12
E-KL18-PL-0419 ILLUSTRATION 7: FORK ASSEMBLY 300035 PARTS LISTING - ILLUSTRATION 7: FORK ASSEMBLY 300035 1 2 3 4 100005 54026 10306 10009 FORK WELDMENT WHEEL, 4 X 2 X 3/4 W/ ROLLER BRG. PIN, COTTER 3/16 X 1-1/2 WASHER, FLAT 3/4 SAE ZINC 800-638-3326 • edcoinc.com • techsupport@edcoinc.
PAGE 13
E-KL18-PL-0419 ILLUSTRATION 8: HANDWHEEL SUBASSEMBLY 52081 PARTS LISTING - ILLUSTRATION 8: HANDWHEEL SUBASSEMBLY 52081 1 2 3 4 5 6 7 80008 80009 14023 55010 10046 10411 50550 HANDWHEEL, SMALL W/ 5/8-11 X 12”ROD BEARING, BALL 5/8” 2-HOLE (NO G.F.) KNOB, BALL 1-3/8 W/ 1/2-13THD, BLK. SPACER, HANDWHEEL 5/8”ID X 3/4”L NUT, HEX 5/8-11 ZINC SCREW, SKT. HD. CAP 1/2-13 X 4 ZINC SLEEVE, BRASS 1/2” TAPERED 1 1 1 1 1 1 1 800-638-3326 • edcoinc.com • techsupport@edcoinc.
PAGE 14
E-KL18-PL-0419 ILLUSTRATION 9: WATER VALVE BRACKET ASSEMBLY 100153 PARTS LISTING - ILLUSTRATION 9: WATER VALVE BRACKET ASSEMBLY 100153 1 2 3 10711A 56022 10799 VALVE & HOSE CONNECTOR ASSY. BRACKET WELDMENT, WATER VALVE BARB ELBOW 90, 3/8HOSE X 1/4MPT 800-638-3326 • edcoinc.com • techsupport@edcoinc.
PAGE 15
E-KL18-PL-0419 ILLUSTRATION 10: BLADE GUARD ASSEMBLY 300037 PARTS LISTING - ILLUSTRATION 10: BLADE GUARD ASSEMBLY 300037 1 2 3 100002 11562 11881 BLADE GUARD WELDMENT BARB ELBOW 90, 3/8HOSE X 1/8MPT NOZZLE, FLAT SPRAY 1/8 NPT MALE 1 1 1 800-638-3326 • edcoinc.com • techsupport@edcoinc.
PAGE 16
E-KL18-PL-0419 ILLUSTRATION 11: ENGINE ASSEMBLY 300038 PARTS LISTING - ILLUSTRATION 11: ENGINE ASSEMBLY 300038 1 2 3 4 5 15029 10625 10128 100221 56234 ENGINE, HONDA GX390UT2QC9 CYC.AC MUFFLER CAP, HONDA #18331-ZE3-811 RIVET, BLIND 1/8 X .275L X .250HD LEVER CONTROL ASSY., THROTTLE OIL DRAIN KIT, M12-1.5 X 7-5/8” 800-638-3326 • edcoinc.com • techsupport@edcoinc.
PAGE 17
E-KL18-PL-0419 WIRING DIAGRAM FOR HONDA ENGINE 800-638-3326 • edcoinc.com • techsupport@edcoinc.
PAGE 18
E-KL18-PL-0419 DECAL SHEET 800-638-3326 • edcoinc.com • techsupport@edcoinc.
PAGE 19
E-KL18-PL-0419 LIMITED EQUIPMENT WARRANTY OF SALE Equipment Development Company, Inc.
PAGE 20
E-KL18-PL-0419 BEFORE USING THIS PRODUCT Have You Used EDCO’s Online Customer Support?? Scan This QRC or Visit www.edcoinc.com/customer-support READ: EDCO Owner’s Manuals and Parts Listings share basic information and parts of each product. Download and print them whenever needed. WATCH: EDCO Product Training Videos show how to use products, install tooling, and perform basic maintenance. FIND: Somewhere on this product is an EDCO QRC Training Decal.