Datasheet of ED-GW1302S V1.20211207 ED-GW1302S REV1.0 LORAWAN GATEWAY MODULE SX1302 + SX1250, MINI PCIE, SPI, US915 / EU868 2021-12-17 EDA TECHNOLOGY CO.,LTD EDA Technology Co.
Datasheet of ED-GW1302S V1.20211207 Copyright Statement: ED-GW1302S and its related intellectual property are owned by EDA Technology Co.,LTD. EDA Technology Co.,LTD has the copyright of this document and reserves all rights. Any part of the document should not be modified, distributed or duplicated in any approach and form with the written permission issued by EDA Technology Co.,LTD. Disclaimer: EDA Technology Co.
Datasheet of ED-GW1302S V1.20211207 Revision History Date 2021-12-17 Version Description Draft Initial release. Note EDA Technology Co.
Datasheet of ED-GW1302S V1.20211207 Contents Copyright Statement: ....................................................................................................................................................ii Disclaimer: ....................................................................................................................................................................ii Revision History ..................................................................................................
Datasheet of ED-GW1302S V1.20211207 Chapter 1 Overview ED-GW1302S module is a new generation of LoRaWAN gateway module in mini-PCIe form-factor with SPI interfaces based on Semtech® SX1302 and SX1250. It features extremely low power consumption, outstanding performance with CE, FCC certified.
Datasheet of ED-GW1302S V1.20211207 1.3 Interface Diagram EDA Technology Co.
Datasheet of ED-GW1302S V1.20211207 1.4 Block Diagram EDA Technology Co.
Datasheet of ED-GW1302S V1.20211207 Chapter 2 Interfaces 2.1 Pinout EDA Technology Co.
Datasheet of ED-GW1302S V1.20211207 2.2 Power Pin Name Pin ID GND 4,9,15,18,21,26,27,29,34,35,37,40,43,50 3.3V 2,24,39,41,52 Pin Type Description PI Power In The power in voltage of ED-GW1302S is 3.3V. Under TX mode, the max current can be 400mA. 2.3 SPI Interface Pin Name Pin ID Pin Type Description SX_CLK 45 DI SPI Clock SX_MISO 47 DO SPI MISO SX_MOSI 49 DI SPI MOSI SX_CSN 51 DI SPI CS 2.
Datasheet of ED-GW1302S V1.20211207 2.4.3 RX_ON When receive is enabled, the RX_ON signal will output HIGH, and the RX LED will on. 2.4.4 TX_ON When transmit is enabled, the TX_ON signal will output HIGH, and the TX LED will on. 2.4.5 CFG_ON When the module is configurated successful, the CFG_ON signal will output HIGH, and the CFG LED will on. 2.5 Antenna Connector The Antenna connector is compatible with I-PEX 1 standard. EDA Technology Co.
Datasheet of ED-GW1302S V1.20211207 Chapter 3 Electrical Characteristics 3.1 Power Parameter Description Min Type Max Unit VCC Power In 3.0 3.3 3.6 V 3.2 IO Parameter Description Min Max Unit VIH Input High Voltage 0.7 * VCC VCC + 0.3 V VIL Input Low Voltage -0.3 0.3 * VCC V VOH Output High Voltage VCC – 0.5 VCC V VOL Output Low Voltage 0 0.4 V 3.
Datasheet of ED-GW1302S V1.20211207 Chapter 4 Dimension EDA Technology Co.
Datasheet of ED-GW1302S V1.20211207 Chapter 5 Contact ⚫ Email – sales@edatec.cn / support@edatec.cn ⚫ Mobile – +86-18621560183 ⚫ Website – https://www.edatec.cn ⚫ Address – Room 301, Building 24, No. 1661, Jialuo Road, Jiading District, Shanghai 5.1 About EDATEC EDA Technology Co.,Ltd is located in Shanghai, it is one of Raspberry Pi’s Global Design Partners.
FCC Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
